ENGLISH
11
PRODUCT USAGE
Adjust the Steam Wand to desirable
position. Submerge the tip of the Steam
Wand just below the surface of milk in the
Milk Pitcher.
4
2
Angle the Steam Wand towards the Drip
Tray or into a cup. Press
button to
start. Once water turns to steam, press
button to stop.
3
Press
button to initiate the steam.
Froth until desired level of foam and
temperature is reached. To stop the
steam, press
button again. To avoid
splattering, wait until the steam stops before
removing the Steam Wand from the milk.
5
NOTE:
You can pause the cycle by pressing
button to stop the flow of water
before the cycle complete.
USING HOT WATER FEATURE
The Steam Wand can also dispense hot water which is great for an americano, tea, hot
chocolate, etc. You can also use hot water to pre-heat cups.
1 2
Toggle the Mode Button to select Water.
Place a cup under the Steam Wand.
1
1 2
1 2
Press Dose Button to select the volume of
water 1 (~ 118 ml) or 2 (~ 177 ml).
Press
button to start water cycle.
Water flows out from the Steam Wand.
2
W11331487C_01_EN.indd 11
W11331487C_01_EN.indd 11
26-04-2021 13:42:07
26-04-2021 13:42:07
