Kitchen Living GT-AS-01-US, Руководство пользователя

Страница: 15 / 39

AFTER SALES SUPPORT
USA
Operation p
15
USA
1 866 558 8096
service@801service.net
Electric
Knife
Sharpener
Sharpening slotted screwdrivers
You cannot grind Phillip’s head screwdrivers or similar with
this sharpener. You can only sharpen slotted screwdrivers.
1. Applying only slight pressure, run the screwdriver into the sharpening
slots
1
from the top so that it is centric with the grindstone (see Fig. D ).
2. Take the screwdriver out and check the edge condition. If necessary, correct
the edge condition if only one side has been sharpened.
3. Turn the screwdriver over or use the second sharpening slot
2
to grind
the other side.
4. You can use the coarse sharpening slots
10
and
11
in the same manner if
the screwdriver is very dull or already has notches. You can make slight cor-
rections to the edge condition with the two fine sharpening slots.
5. Then slowly and carefully run the screwdriver into the grinding opening for
screwdrivers
5
in a level position to grind the tip straight.
After sharpening
1. Turn the sharpener
9
off with the ON/OFF switch.
2. Pull the power plug.
3. Push the wind-up button for the power cable
4
– the power cord will be
drawn into the housing
8
.
4. With the sharpener in one hand, tap it with your other hand so that any resi-
due falls out of the sharpening slots.
5. Wipe the sharpener and the work surface off with a damp cloth.
grind t ind
th the ON/O the ON/O
ton for the p n for the
sing g
re
8
..
ner in one ha r in one
of the sharpe the sharpe
sharpener an harpener a
V10
10
11
in the sa in the s
hes. You can hes. You can
fine sharpen fine sharpen
ver into th ver into t
e tip