Attention!
It is normal for the pizza maker to produce some smoke and smell during
initial use. This heating process removes any residues left on during the
manufacturing process
.
Do not cut the food on the hot plate
Cleaning and Maintenance
Make sure the power has been switched off and the appliance has cooled down to room temperature
before cleaning.
Use a wet cloth or sponge to clean the plate and housing.
While cleaning, never immerse the whole unit or power cord into water.
The unit is not dishwasher safe
Trouble Shooting Guide
PROBLEM
The heat indicator light goes on and off.
CAUSE
This is an automatic thermostat light.
SOLUTION
The light will stay on until the oven has reached the desired temperature setting.
PROBLEM
Top of pizza burns.
CAUSE
Temperature of oven is too high.
SOLUTION
When checking the pizza, if you think the top is cooking quicker than the bottom, turn
the oven setting lower, leaving the pizza to continue cooking without the thermostat light on.
Alternatively leave the lid open for a couple of minutes so you can watch the pizza finish cooking.
PROBLEM
Bottom of pizza burns.
CAUSE
Temperature of oven is too high.
SOLUTION
Make sure the oven has been pre-heated. When the oven light goes out, allow a
couple of minutes for the stone to rest before adding the pizza. When cooking additional pizzas
one after the other it is best to leave the lid open for a few minutes in between cooking pizzas with
the setting back to 1
