11
Specifical function
Select the cooking zone you wish, and press the same number level button twice; the point
corresponding display shows. The cooking zone will work high level. Push the number level again,
Then the cooking zone will recover to previous level.
Deactivation of cooking zones
Select the cooking zone you wish to switch off. Press the corresponding button.
Press the key “
” to set the level to “0”. The cooking zone switches off and the residual heat indicator “H”
lights up.
Child lock
This function locks the controls to prevent accidental switching on of the Induction Cooker. To
activate the child lock function, switch on the Induction Cooker and hold button
for three
seconds; the timer shows Lo. Then the control panel is locked.
To deactivate the control panel lock, repeat the activation procedure. The Lo goes off and the Induction
Cooker is active again.
Timer
The timer can be used to set cooking time for a maximum of 99 minutes (1 hour and 39 minutes)
for all cooking zones.
Select the cooking zone to be used with the timer, press the button with the
clock symbol
then set the desired cooking time using the
/
/
/
/
/
/
/
/
buttons of the timer function (see figure). After a few seconds, the timer begins the countdown. Once the set
time has elapsed, an acoustic signal sounds and the Induction Cooker switches off automatically.
To deactivate the timer, press the “
” button to set the display showing “00” or hold the button with the
clock symbol for at least 4 seconds.
Flex function (Only for model INDV-38FX)
Push this button, two working zone will combine one zone,
Pan can cook anywhere in this field
.
Auto switch off
The Induction Cooker will automatically switch off when you did not set cooking time, forgot to switch off the
Induction Cooker, and did not operate the Induction Cooker at all in 120 minutes
CONTROL PANEL WARNINGS
Residual heat indicator
The Induction Cooker is fitted with a residual heat indicator for each cooking zone. These indicators
alert the user when cooking zones are still hot.
If the display shows
, the cooking zone is still hot. If the residual heat indicator of a given cooking zone is
lit, that zone can be used, for example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator – Error code “E0”
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for
your induction cooker, the symbol ”E0” mean “no pot” will appear in the display (see figure at side).
If no pot is detected within 180 seconds, the Induction Cooker switches off.
