Kitagawa M0915RA, Инструкция по эксплуатации

Страница: 27 / 52

MA0882RHG
26
6-2. Adjusting the position of a proximity switch
Read following instruction when you adjust the proximity switch. (Fig.8)
①
Loosen the socket head cap screw [22] that fix the adjusting plate [14].
②
Unclamp the chuck.
③
Install one proximity switch, passing through the adjusting plate [14], and make it
approach to the detectable plate [8] until the LED of proximity switch lights up. At this
time, adjust the screw of proximity switch so that the distance between proximity switch
and outside diameter end of detectable plate [8] is about 1 mm, and slide to adjust the
adjusting plate [14] in the axial direction.
④
Tighten the socket head cap screw [22] to fix the adjusting plate [14].
⑤
Grip the workpiece.
⑥
For another proximity switch proceeds in the same way as it is described from point 4
and 5.
⑦
Confirm whether LED lights up by opening and closing the chuck several times.
Fig.8