Kitagawa JN N Series, Инструкция по эксплуатации

Страница: 28 / 40

27
・
To keep the chuck running in the best condition for a long time, adequate grease
lubrication is necessary. Insufficient grease lubrication causes a drop in the
gripping force, operation failure at low hydraulic pressure, drop in gripping
precision, abnormal wearing, seizing, etc. The work will fly out due to a drop in
the gripping force and this is dangerous.
6-2-2. SC-N, SN-FN type
1. Position to lubricate
・
Lubricate using a lubricator from the oil cup on the body surface. After lubrication, repeat
opening and closing the jaw several times without gripping work.
2. Grease to use
・
Lubrication oil equivalent to ISO VG32
3. Frequency of lubrication
・
Add grease once every day.
・
In the case of high rotation or in the case of using a large amount of water soluble
coolant, increase the frequency of lubrication according to the usage conditions.
6-2-3. Safety information about grease and anti-rust oil
Applicable range
・
Designated grease
・
Antirust agent applied to the product at the delivery.
First aid measures
After inhalation: Remove victim to fresh air. If symptoms persist, call a physician.
After contact with skin: Wash off with mild cleaners and plenty of water. If symptoms persist,
call a physician.
After contact with eyes: Rinse with plenty of water. If symptoms persist, call a physician.
After ingestion: If large amounts are swallowed, do not induce vomiting. Obtain medical
attention.
・
Please refer to each MSDS about the grease and the anti-rust oil which you prepared.