Kitagawa HG-A97-212, Инструкция по эксплуатации

Страница: 7 / 25

6
The input force of the chuck (piston thrust, pulling force of the draw pipe)
must not exceed the allowable maximum input force.
・
Input must match the specification of the chuck.
・
Adjust the hydraulic pressure to the cylinder so that the input force, which determines
the gripping force of the chuck, does not exceed.
・
Excessive input force can lead to breakage of the chuck, which is very dangerous, as
the chuck can work can be damaged and fly out.
When gripping a work with the chuck, do not get fingers or hands become
caught.
・
This could cause crushed or cut fingers and hands.
When the protrusion of the work is long, support it with the steady rest or
center.
・
If the protrusion is long, the tip of the work can turn and the work fly out.
Determine the gripping force required for processing by the machine tool
manufacturer or user, and check that the required gripping force is
provided before processing.
・
Adjust the hydraulic pressure to the cylinder to obtain the required gripping force. If the
gripping force is insufficient, this is dangerous as the work will fly out.
For All Users
For All Users
For All Users
For All Users