manualshive.com logo in svg

Kistler-Morse Load Stand II, Руководство по установке и эксплуатации

Поделиться
Скачать
Kistler-Morse Load Stand II Скачать руководство пользователя страница 5

1

www.kistlermorse.com

97-1100-01 Rev. J

Load Stand

®

 II

Installation & Operation Manual

I. 

HANDLING AND STORAGE

SAVE THESE INSTRUCTIONS

INSPECTION AND HANDLING

Do not dispose of the carton or packing materials.

Each package should be inspected upon receipt for damage that may have occurred due to mishandling during 
shipping. If the unit is received damaged, notify the carrier or the factory for instructions. Failure to do so may 
void your warranty. If you have any problems or questions, consult Customer Support at 800-426-9010.

DISPOSAL AND RECYCLING

This product can be recycled by specialized companies and must not be disposed of in a municipal collection 
site. If you do not have the means to dispose of properly, please contact for return and disposal instructions or 
options.

STORAGE

If the device is not scheduled for immediate installation following delivery, the following steps should be 
observed:

1.  Following inspection, repackage the unit into its original packaging.
2.  Select a clean dry site, free of vibration, shock and impact hazards.
3.  If storage will be extended longer than 30 days, the unit must be stored at temperatures between 

32º and 104º F (0º to 40° C) in non-condensing atmosphere with humidity less than 85%.

CAUTION: DO NOT STORE A NON-POWERED UNIT OUTDOORS FOR A PROLONGED PERIOD.

Содержание Load Stand II

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды