KisanKraft
®
4-STROKE PETROL ENGINE
: +91.80. 22178200
Page 21 of 44
Air Cleaner
The air cleaner is a dry type including paper element and foam element.
•
Remove the clip and dismantle the air cleaner housing or remove the wing nuts
and air cleaner cover.
•
Wash the element in solution of household detergent and warm water, then
rinse thoroughly, or wash in nonflammable or high flash point solvent. Allow the
element to dry thoroughly
1)
Butterfly nut
2)
Air cleaner cover
3)
Butterfly nut
4)
Paper element
5)
Foam element
6)
Seal washer
7)
Silencer plate
WARNING:
Do not run the engine without air cleaner.
DANGER
Using gasoline or flammable solvent to clean the filter element can cause a fire or
explosion.
CAUTION
:
Do not run the engine without air cleaner core, otherwise dust and/or other foreign matters
may get into the engine through carburetor, and results in rapid engine worn-out.
STARTING THE ENGINE
•
Turn the fuel valve to ON position, unscrew the drain plug on carburetor bottom,
and fasten the drain plug until oil spills out.
•
Pull the choke rod to the CLOSE position. Adjust throttle to proper position. Pull
the starter grip lightly until resistance is felt, then pull it rapidly