KisanKraft
®
Spark Ignition Internal
Combustion Piston Engines
for Agriculture
KK-PE4-103 / 163 /203
: +91.80. 22178200
Page 14 of 32
(1) Dismantle Spark Plug
(2) Adjust Clearance
4.
Clean the fuel tank and filter when working time reaches 100hrs: Remove the fuel
cover, drop out filter, and wash it with brush slightly. Remove fuel tank, clean the
fouling and water inside fuel tank. Reinstall fuel tank, place filter from fill-in hole,
filling the clean fuel to red line level.
1)
Drain plug
2)
Engine switch
3)
Lower level
Check aging of fuel pipe every 2 years. If ageing, hardening and cracking is detected,
have it replaced. Tighten the joints, and check leakage.
Before storing the unit for an extended period:
1.
Make sure the storage area is free of excessive humidity and dust.
2.
Service according to the table below.
Storage Time
Recommended Service Procedure To Prevent Hard Starting
Less than 1 month
No preparation required
1 to 2 months
Fill with fresh gasoline and add gasoline conditioner
