KisanKraft
®
AGRICULTURAL INTER-CULTIVATOR
KK-IC-406D
KK-IC-406D (Electric Start)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
: +91.80. 6835 7800
Page 10 of 56
Scope
Intercultural/Weeding Operations
:
Applicable to garden, tea plantation, orchard,
sugarcane, corn land, vegetables land,
greenhouse
etc., for rotary assignments.
Fix the tines onto the left and right side of the transmission shaft of the running part of the Inter-
cultivator, then use two M8×55 screw bolts for axial positioning. After that, the machine can
start Intercultural/Weeding Operations. (See following table 2 and figures 2, 3)
Form of Tines
Four groups
Five groups
3 blades
4 blades
3 blades
4 blades
No. of blades
3×8
4×8
3×10
4×10
Width
of
Intercultural/Weeding
Operations (mm)
1050
1050
1350
1350
Applicable Soil
Paddy field without
too much water and
with Earth of high
moisture
Hard
earth
Wet earth
after rain
Dry land or
with
long
stump
from
long-stem.
Crop.
Figure 2. Inter-cultivator
Figure 3. Ditching device
Ditching & Ridging:
Knock down the adjustment screw before the ditcher is fixed. Subject to
the adjustment of the width and height for ditcher, the ditching can be conducted. (See figure
3)
Short Distance Transport:
When fixing the forearm of the wagon box on the trailer and wheels
on the transmission shaft of the running part, the machine can be used for transportation. The
rated load is 250kg, under normal rotation speed of the diesel engine, speed of the fast shift is
about 10km/h and that of the slow shift is about 5 km/h.
Multi-Functional Working:
Dismount protection cover of the gearbox (No.2 in Figure 1),
unscrew the bolts away from the rear part of the main shaft, and take the cover for keys out of
the shaft, fasten the self-contained belt pulley or coupling onto the gearbox
’s main shaft’s rear
part with screws. Type A of common V belt
is adopted for belt pulley’s cross section. Rated rpm
of the belt pulley is 3000 rpm. When the corresponding devices are equipped, pumping water,
spraying, threshing, reaping, generating electricity, etc. are realized. (Above additional
implements are in exploration process.
