KisanKraft
®
INTERCULTIVATOR
KK-IC-320P
: +91.80.
6835 7800
Page 15 of 32
Working
intervals
Maintenance
contents
Everyday
Work
with half
load for
8 hours
Work
for 1
month
or 20
hours
Work for
3 months
or 150
hours
Every
year or
1000
hours
Per 2
years
or 2000
hours
Debug
malfunction
√
Adjust operation
parts
√
Tighten the belt
√
Gear and
bearing
√
4. Long-period storage of mini-Inter-cultivator
When mini-Inter-cultivator needs storing for a long period, the following measures should
be taken to prevent tarnishing.
4.1 Wash oil stain and clean dust on the machine.
4.2 Drain lube oil in the gear box and refuel new oil.
4.3 Paint pickling oil on non-aluminum parts where there is no paint.
4.4 Store Mini-Inter-cultivator in the dry, safe place where there is enough aeration.
4.5 Properly keep the attaching tools, certificates of conformity and instruction of
mini-Inter-cultivator .
ADJUSTMENT METHODS
1. Adjustment of clutch cable
The abrasion of friction plates and the clutch shifting fork will make malfunction of
clutch after using for a long time, in this case, should adjust clutch accordingly.
1.1 Clutch cable adjustment
1.1.1 Every Inter-cultivator must be equipped with one set of clutch limit
usually open sleeve, which cannot be replaced by a common clutch
cable.
1.1.2 When adjusting the clutch, must make sure the small sleeve running in
the scale range. When loosen clutch handlebar, the main output shaft
should be stopped immediately. Please replace a new clutch cable if the
small sleeve runs out of the scale range.
1.1.3 When adjust clutch cable, please make the clutch cable adjusting rod
on both clutch shifting fork arm and armrest-frame in the proper position,
and then tighten the nut to lock them.
