KisanKraft
®
INTERCULTIVATOR
KK-IC-320P
: +91.80.
6835 7800
Page 12 of 32
•
Put the engine at horizontal position. Insert the dipstick into the filler neck
without screwing it in. Get the dipstick out, check the oil level. The oil level
should be the mentioned position in the dipstick. (Look at Photo III).
•
Refuel air cleaner with oil, disassembling the synthetic glass cover tent below
the cleaner, and refuel 0.1L No.20 oil.
1.5 Add fuel; add No. 90 petrol to fuel tank.
1.6 Make preparation following the user manual before starting machine.
△
!
Attention
Don’t rotate dipstick, don’t add lube oil between upper
level and lower level.
2. Inter-cultivator adjustment
△
!
Attention
Please put the Inter-cultivator on firm land level before adjusting the handle height to
prevent the handle from collapsing accidentally.
2.1 Handle frame adjustment
Adjust the height and direction of handle frame by lock hands.
2.2 Working depth adjustment
Control the working depth by adjusting the height of the resistance rod. Rod
going down, working depth decreased; Rod going up, working depth increased.
3. Engine start and stop
△
!
Attention
Shift lever must be in the neutral gear position.
3.1 Shift lever must be in the neutral gear position before starting the Inter-cultivator.
3.2 Start the gasoline engine following the steps of user manual.
3.3 Engines should run in the low speed (1450-1750r/min) for 2-3 minutes without
load.
3.4 Check if the engine runs normally, if abnormal, please turn it off and repair.
△
!
Attention
The Inter-cultivator must running-in before starting using. Check Chapter VI for
running-in method
