KisanKraft
TM
BATTERY SPRAYER
KK-BBS-212/218/315/318
: www.kisankraft.com
: +91.80. 22178200
Page 13 of 32
Be sure of the safety, please store this machine in place out of reach of children and
infant in order to avoid an electric shock.
If the battery of this machine needs to be replaced, it must be confirmed
by the company. The disabled battery couldn’t be thrown away anywhere.
Please send it into the proper recycle centre which can deal with it.
3. Connection of the spraying parts:
a) Fix the spraying pole in the place as shown in the figures.
b) Insert the spraying pole into the switch and fasten the screw cap.
Caution
: Don’t fasten the
nut with the pliers, or it may harm the nut.
c) Hold the knob assembly with one hand and adjust the direction of the nozzle by
holding the spraying head with the other hand.
d) If you want to spray higher, you could connect two spraying poles, which will
increase the total length.
e) This machine has three different kinds of nozzles. You could use the nozzle
according to different conditions.
Model of the
Nozzle
Diameter of the
Nozzle
（
mm
）
Flow
（
L/min
）
Working
Pressure
(MPa)
The
amount of
Nozzle
Taper Nozzle
1.0
0.8
0.15
～
0.35
1
Sector Nozzle
0.7
0.48
0.15
～
0.4
1
F Nozzle
1.5
1.2
0.15
～
0.25
2
Note
: The data in the table is the trial value of our company and not the confirmed value.
The amount of spraying mist and working pressure may change with the environment.
4. Add Liquids
a) Please keep this machine on the actinic ground when adding liquids.
