KISANKRAFT KK-BBS-212, Руководство по эксплуатации

Страница: 11 / 32

KisanKraft
TM
BATTERY SPRAYER
KK-BBS-212/218/315/318

: www.kisankraft.com

: info@kisankraft.com

: +91.80. 22178200
Page 11 of 32
MAIN CONSTRUCTION
This machine mainly has five parts.
The dissepiment pump : It is the core part of this machine. It influences the property of the
whole machine. The power of the machine comes from DC motor which keeps the membrane
running. There is a press – control switch on the dissepiment pump, if the operating pressure
exceeds the rated pressure, the pump power will be shut off automatically to protect the motor.
The dissepiment pump connects with tank by pump holder.
Battery : The specification is DC12V7AH, fixed in the sprayer. The battery is held on the battery
seat by the belt. The battery is charged by the charging-line combination, also the fuse on the
charging-line combination protects the motor.
Chemical Tank : It is filled with liquids. The tank ’s design is based on the shape of the person’s
back, so it is comfortable to wear on the back.
Spraying Part: It accomplishes the spraying work. There is a clique core switch, non- omit and
is easy to operate. To start working, turn on the power switch and press the handle switch, the
pump will shut down automatically if the handle is released. If you repress the handle, it works
again.
Knapsack system : It is composed of straps and pad used for wearing on the back
METHODS OF OPERATION
1. Introduction to the function :
As shown in the figure, Control system is installed on one side
of the cover: Voltmeter, Speed Regulator, Charging Plug and
a Power Switch.
Voltmeter Indicate over-discharge, over-charge and normal
service condition.
Speed Regulator
：
Adjust the rotating speed of the pump to
make the pump work stably, achieving the result of spraying
stabilization.
Charging plug : Linked with charger to transmit energy to the
battery.
Power switch : Control the connection between the power and
diaphragm pump.
Under voltage protector
(
optional
) ：
Linked with speed
regulator to protect the battery.
When the battery voltage reached the preset protecting
voltage 9.5-10V
，
buzzer rings indicating that you should stop
working to charge battery for maintenance
2. Charging the Battery:
 The new machine must be charged before using.

If a machine is stored for a long time, it must be charged before
use.
 Charging with the special charger