Caution:
Do not open, disassemble or attempt to repair the CMT-600C as it may cause a short circuit. Make sure the
battery is installed correctly, use only specified batteries. Do not place near a heat source to avoid an explosion. Do
not use or keep under the following conditions: 1.) high temperature like direct sunlight or near heaters. 2.) high
moisture like bathroom, wet floor, etc. 3.) excessive vibration or mechanical shock. Remove the battery when the
tuner is not in use for a long period of time. Do not use excessive force, or drop the tuner. Do not use thinners or
alcohol for cleaning. Use a dry and clean cloth only. When the battery is nearly used up, the LCD display and backlight
will become dim, and the battery needs to be replaced. Turn off the power. Press in force and remove the battery
cover outwards. Replace the old battery with a new one, pay attention to the direction of cathode/anode of the
electric battery when installing the batteries. Put the battery cover back. Press button ON/OFF to check if the tuner
works.
TUNER:
METRONOME:
A4 Pitch range: 410 … 490 Hz
Beat: 0 ... 9
Tuning range: C0 (16,35Hz) - A7 (3.520,00Hz)
Tempo range: 30..280 BPM (in 1 BPM steps)Tuning
Item: Chromatic, Guitar, Bass, Ukulele, Violin
Tone generator: A4=440Hz
Mode: MIC input tuning / CLIP input tuning
Accuracy: ≤1 %
Power supply: 2 x AAA batteries, Dimensions: 110mm (L) x 72mm (W) × 18mm (H)
Press “
MODE/ON/OFF
” for >2sec to turn on device, press again for >2sec to turn off. Buy pressing “
MODE/ON/OFF
”
short-time you can step through functions Tuner/Metronome/Tone. Display will change according to selected mode.
Press “
Sound
” for >2sec to turn on backlight of LCD display, press again for >2sec to turn off.
Press button “
MODE/ON/OFF
” short-time (several times) until
“
Tuner
” is displayed. By pressing “
SELECT
” button short-time you
can select MODE/FLAT/PITCH.
To adjust settings press slightly “
▲
” or “
▼
”.
A4 pitch range:
410..490 Hz
Mode / selected instrument:
Chromatic/Guitar/Bass/Ukulele/Violin
Flat:
b, bb, bbb, bbbb
Connect your instrument with 6.35mm “
INPUT
” jack or use external clip
microphone. If no cable is connected to input jack, the tuner is working with
built in microphone “
MIC
”. You can connect an amplifier to 6.35mm “
OUTPUT
”
jack, the signal can be heard on external amplifier. When you want to use the internal “
MIC
” to tune an acoustic
instrument (violin, western guitar, etc.), place the tuner on a table and use the backside stand.
To tune your instrument play a string and the tuning will be displayed:
Flat:
needle points to the left, LED “
b
” lights up in red
Sharp:
needle points to the right, LED “
#
” lights up in red
In-tune:
needle in the center, middle LED lights up in green.
Press “
MODE/ON/OFF
” short-time (several times) until
“
Metro
” is displayed. By pressing “
SELECT
” button short-time
you can select RHYTHM/TEMPO/BEAT.
To adjust settings press slightly “
▲
” or “
▼
”.
Tempo range:
30…280 BPM (in 1 BPM steps)
Beat type:
0..1..2..3..4..5..6..7..8..9
Rhythm:
Press “
SOUND
” slightly to start metro sound, press it again
to stop the metro sound. You can connect an amplifier to 6.35mm
“
OUTPUT
” jack, the signal can be heard on external amplifier.
Volume can be adjusted with “
VOLUME
” control. You can use 3.5mm earphone jack if you want to use earphones.
Press “
MODE/ON/OFF
” short-time (several times) until
“
Tone
” is displayed. By pressing “
SELECT
” button short-time
you can select VIOLIN/UKULELE/CHROMA/GUITAR/BASS.
To select sound demo press slightly “
▲
” or “
▼
”.
Remark: A4 pitch is defined as 440HZ.
Press “
SOUND
” slightly to start tone generator, press it again
to stop the tone generator sound. You can connect an amplifier
to 6.35 “
OUTPUT
” jack, the signal can be heard on external
amplifier. Volume can be adjusted with “
VOLUME
” control.
You can use 3.5mm earphone jack if you want to use earphones.
Your product is designed and manufactured with materials and components of high quality, which are recyclable and can be reused. The
symbol means that your product should be disposed of separately from household waste when it reaches its end of life. Please dispose of this
equipment at your local collection point or recycling center. Please help to protect the environment in which we all live.
All specifications and appearances are subject to change without notice. All information was correct at time of printing. Musikhaus Kirstein GmbH does not
guarantee for the accuracy or completeness of any description, photograph or statement contained in this manual. Printed colors and specifications may
vary slightly from product. Products from Musikhaus Kirstein GmbH are only sold through authorized dealer. Distributors and dealers are not agents of
Musikhaus Kirstein GmbH and have no authority to bind Musikhaus Kirstein GmbH legally in any way. This manual is protected by copyright. Any copying or
reprint, even in excerpts, is only allowed with written consent of Musikhaus Kirstein GmbH. The same applies to reproduction or copying of images, even in
altered form.
Musikhaus Kirstein GmbH
Bernbeurenerstrasse 11
86956 Schongau
Germany
www.kirstein.de
Rocktile CMT-600C METRO-TUNER User Manual
Operation
Tuning Mode
Metronome mode
Tone generator mode
Specifications
WEEE Declaration / Disposal
