For temperature monitoring via the network, the
KIRSCH-DATANET software (version 5.0 or
higher) must be installed (complete assembly and
connection manual is supplied with PC-KIT-NET).
Every unit needs its own IP address that is not yet
in use in your local network.
At the factory, the IP address is set to:
192.168.0.101
1.
Insert unit key in key switch.
2.
Set unit key to “P”.
3.
Press and hold
[Max.]
and
[Min.]
simultaneously for four sec-
onds.
ð
The display shows
.
4.
Press
[Max.]
or
[Min.]
to go to level
and confirm with
Set.
5.
Press
[Min.]
to select the parameter
.
6.
Press and hold
[Target temperature]
.
ð
The first three digits of the IP address are displayed.
7.
Use
[Max.]
and
[Min.]
to set the selected digits of the required
IP address.
ð
The number changes on the display in steps of one.
8.
Release
[Target temperature]
.
ð
The first three digits of the IP address have been
entered.
9.
Press
[Min.]
to select the next parameter
.
10.
Press and hold
[Target temperature]
.
ð
The next digits of the IP address are displayed.
11.
At levels L52 and L53 repeat steps 6 to 10 until the IP
address of the unit has been entered completely.
12.
Set key switch to “1” to complete your input.
ð
The IP address of the unit has been set up.
Setting up the IP address on the
unit
Operation
Setting up PC-KIT-NET (optional)
27.05.2021
Refrigerator/freezer MED series
43
