KIRLOSKAR 2R1040, Руководство по обслуживанию

Страница: 14 / 48

R1040 MAINTENANCE MANUAL
Page 14 of 48
3.1.2 Diesel
Fill the fuel tank after making sure that it is properly clean. Use High Speed Diesel fuel
as recommended in section 2.5.2. According to the ambient temperatures, summer or
winter grade diesel fuel should be used. Connect the fuel pump to fuel supply tank as
shown in fuel circuit diagram fig. 2.5.1.
•
Never fill the fuel tank while the engine is running. Strictly observe cleanliness.
Do not spill any fuel.
•
The recommended minimum fuel pipe inside diameter for fuel inlet pipes & fuel
return pipe (leak off) between tank and engine are as below.
Fuel pipe
Min. inside diameter mm
Fuel supply pipe between tank, engine &
filters 10 mm
Leak off return pipe from engine to tank 6 mm
3.1.3 Bleeding of fuel system
Loosen the vent screw on primary fuel filter as shown in fig.3.1.3.1 below
Fig.3.1.3.1 Primary element Fig. 3.1.3.2 Micro element
Operate the fuel lift pump (feed pump) until oil flows without air bubbles as
shown in fig. 3.1.3.3 below.
Fig. 3.1.3.3