Kirkland Signature 2327661, Руководство по установке

Страница: 35 / 51

4. Reinstall the top sear burner brass elbow by using a
wrench.
5. Reinstall the top searing burner cover.
35
Make Gas Connection
1. Before making any connections, check to ensure the
Natural Gas inlet pressure falls between the allowable
range of 7" W.C. / 0.25 psi and 14" W.C. / 0.5 psi. If the
NG inlet pressure does not fall within this range, contact
your local gas supplier.
2. A combination of pipe fittings must be used to connect the
grill to the existing gas line.
◼
The 10 ft (3.0 m) PVC flexible gas supply hose design
certified by CSA must be used.
◼
Pipe-joint compounds suitable for use with Natural
Gas must be used. Do not use tape.
◼
There must be a certified manual shut-off valve in the
gas supply line near the grill for easy access.
3. Connect the brass connector on one end of the 10 ft (3.0
m) PVC flexible gas supply hose to the Natural Gas
pressure regulator.
4. Connect the quick connector on the other end of the 10 ft
(3.0 m) PVC flexible gas supply hose to the rigid Natural
Gas supply pipe.
5. Open the manual shutoff valve in the gas supply. The
valve is open when the handle is parallel to the gas pipe.
6. Test all connections using an approved noncorrosive leak-
detection solution. Bubbles will show a leak. Correct any
leak found.
A. Closed valve
B. Open valve