Kirkland Signature 2327661, Руководство по установке

Страница: 34 / 51

5. Reinsert the burner and reattach using the cotter clip and
screws previously removed. Repeat the procedure for
each main burner.
6. Position the igniters so they are 3.2 mm / 1/8 in away from
each burner.
34
Change The Top Sear Burner Orifice
1. Use a screwdriver to remove the two screws from the top
sear burner heat shield. Remove the heat shield.
2. Use an adjustable wrench to remove the brass elbow.
3. Use a 6 mm socket wrench or 6 mm nut driver to remove
the orifice. Replace with the corresponding Natural Gas
orifice.
IMPORTANT: Check that the NG orifice is properly
installed inside the valve.