PT6808 Service Manual
maintenance staff call, etc.
4) Emergency call
Press the orange “Emergency Button” to send an emergency call in case of emergency.
5) Dynamic grouping
Dynamic grouping function allows the base station to group units as a new team by remote
control.
6) Remote killing
The base station can give remote killing order to the lost or stolen radio to prohibit its operation.
7) Reactivating
The base station can give reactivating order to the remote killed radio so that it can return to
normal operation.
8) Missed calls
Missed calls can be displayed, and the status of the missed calls can be stored.
9) Contact list
Large memory of 250 contacts.
10) Status message
Content of status messages can be programmed by PC software. Alert tone sounds while
messages are received, and the status message can be checked by the user.
11) Redialing
10 groups of dialed number can be stored in the radio. Press the Redial Button to redial.
12) Don’t disturb
This function allows the radio to refuse voice calls, status message calls, and short data calls.
5.3 Conventional Features
1) Standard QT (51)/DQT(166)
The dealer may have set CTCSS/DCS on channels of the radio. In doing this, other irrelevant
calls using the same channel can be ignored. If a channel has set CTCSS/DCS, the squelch can be
opened only when the received signal has the same CTCSS/DCS.
2) DTMF dialing
Input the number while pressing the PTT key. Then you can hear DTMF sound from the speaker.
3) Busy channel lockout (BCL)
This function can prevent other radios on the same channel from being interfered. When the
channel is occupied, the radio will prohibit transmitting signals.
4) Channel scan