Kirisun PT6500-02 Скачать руководство пользователя страница 3

Страница: 3 / 26

PT6500-02 User’s Manual

Page 3 of 26

When battery is fully charged the indicator turns green.

The performance will be at the best condition if you remove the battery when the green

indicator is on. Then remove the power adaptor from the wall outlet.

The charger will enter the protection mode when the yellow indicator flashes, which means

the temperature or the circuit is abnormal. Do not charge the battery at this moment, just

remove the battery and turn off the power of the charger.

Notes:

The battery is not fully charged in the factory. Before the initial use, please charge the new

battery.

KB-36C Li-ion battery of this company is adaptable with this machine.

* When you charge the battery the first time or after long time storage (2 months), several

times of charging is needed. Make sure the battery is charged at least once every three

months.

* Do not charge the battery again if it is charged fully or not in the low-pressure warning

mode, otherwise, its life will be shortened or it will be damaged. Remove the battery from

the charger after charging.

* There is a protection circuit in KB-36C battery, so the power will be cut off at too low

battery.

Содержание PT6500-02



























Результаты поиска

Содержание PT6500-02

Отзывы:

Похожие инструкции для PT6500-02

Бренды по названию

Популярные бренды

Kirisun PT6500-02, Руководство пользователя

Результаты поиска

Содержание PT6500-02

Отзывы:

Похожие инструкции для PT6500-02

Бренды по названию

Популярные бренды