PT6500-02 User’s Manual
Page 13 of 26
Notes: programmable key can be set as short key or long key.
The following functions can be programmed by the
dealer:
●
None
Set of None
。
●
Scan
Press the button set as Scan to start scanning. While in scanning, the radio checks every channel (any
channel in any zone) and stops on the channel on which a signal is detected until that signal disappears.
If the delay time between signal disappearing and continuing scanning has been preset, the radio will
remain on that channel. Only when there are two channels added in the scan list and the scan function
has been activated, the radio can start scanning.
▲
It can be set as: short key: scan, long key
：
off.
1. Press the programmable key once to start scanning (it should be effective in the channel scan list).
2. Press
once to quit.
Notes: there are 8 zones from 0 (default zone) to 7; and there can be 128 channels to the most in
each zone. There are totally 16 scan lists; you can select any scan list. Every scan list can scan
any channels in different channels (16 channels to the most).
●
Separate working
Press the button set as Separate Working to start separate working. This mode is to ensure the safety
of the user while using the transceiver separately.
▲
It can be set as: short key: personal working, long key
：
off.
1. Press the programmable key once to start personal working;
2. Press once again to quit.
Notes: the separate working is connected with the automotive checking in the programming
software, and will be effective when both are set.
●
Contact list
Enter the Contact list quickly:
▲
It can be set as: short key: contact list, long key
：
off.
1.
Press the programmable key once to enter the contact list
Call
