Kirisun PT568-01, Руководство пользователя

Страница: 11 / 17

stay at the priority channel; if there is no signal, it will return to the original channel.
c) The revert channel (Tx channel) during the scan can be designated by the dealer. There are
following options available:
Scan start channel:
The radio will transmit signals on the channel for which the scan list
applies.
Scan start c Current channel:
If the scan is paused, the radio will transmit on the
current communication channel. Otherwise, it will transmit on the channel for which the scan list
applies.
Priority channel:
The radio will transmit on the preset priority channel.
Priority c Current channel:
If the scan is paused, the radio will transmit signals on
the current communication channel. Otherwise, the radio will transmit on the priority channel.
Last Rx channel:
The radio will transmit on the last Rx channel of the scan list.
Last Tx c Current channel:
If the scan is paused, the radio will transmit on the
current communication channel. Otherwise, the radio will transmit on the last Tx channel of the
scan list.
6.7.2 Nuisance delete
If a channel continually generates unwanted noise or interference, the preprogrammed
“Nuisance Delete” button can be pressed to remove the channel from the current scan list
temporarily.
Note:
* The priority channel and the last channel in the scan list cannot be deleted.
* Quit the scan mode and enter it again, the deleted channel will be added to the scan list
again.
6.8 Lone Worker
If lone worker function is enabled, press the preprogrammed “Lone Worker” button to enter
Lone Worker Mode. Then the lone worker timer is started. If the preset lone worker time expires,
the radio will make alert tone. If the preset remind time expires, the radio will enter Emergency
Mode and give out emergency alarm.
In the Lone Worker Mode, press the preprogrammed “Lone Worker” button again to quit Lone
Worker Mode.
In the Lone Worker Mode, press the preprogrammed “Lone Worker Reset” button (if a button
is designated as the lone worker timer reset button) or any button (if any button is designated as
the lone worker timer reset button) to restart the lone worker timer.
6.9 Emergency Alarm
Press the preprogrammed “Emergency Alarm” button (the pressing time should be longer than
the debounce time of the emergency alarm switch) to enter the Emergency Alarm Mode. You can
choose to send the preset alarm tone or the background sound to your partner or the system.
In the Emergency Alarm Mode, press the preprogrammed “Emergency Alarm Off” button to
quit the Emergency Alarm Mode, disable or stop sending the alarm tone, and the radio will resume
normal operation.