FP520 Digital Two-way Radio Instruction Manual
III
receiving (listening) or in standby mode.
Your radio complies with the following of RF energy exposure standards and guidelines
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992
Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition
International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998
◆
Operating Instructions to Control RF Exposure
To decrease your exposure and ensure compliance with the occupational/controlled environment exposure limits,
please always adhere to the following procedures.
1. Transmit no more than the rated duty factor of 50% of the time. To transmit, press the PTT button, and to
receive the call, release the PTT button.
2. Keep your radio in a vertical position in front of the face with the microphone 5cm away from your mouth while
transmit.
3. When worn on your body, keep the antenna 2.5cm away from your body while transmit.
4. Do not transmit when the radio is not equipped with an antenna. Transmitting without an antenna may damage
the product and result RF discomfort.
◆
Using the Designated Accessories
