FP520 Digital Two-way Radio Instruction Manual
12
While transmitting, the red LED light. Speak to the MIC with normal voice and keep your mouth from
the MIC 3-8cm away.
4.6 Receiving a Call
When the radio receives signal on the current channel, the green LED lights on. If it is the digital
channel, the radio output the voice when receiving a call with your own Radio ID, your Group Call
or All Call ID on this channel;
Note:
To receive a group call, your radio must be configured as part of that group. (Dealer set it via
programming software).
If it is the analog channel, the radio will output voice when receiving the call with CTCSS/CDCSS
that is the same with CTCSS/CDCSS set up on your selected channel, or there is no CTCSS on
the current channel.
4.7 Answering a Call
On a digital channel, when the radio receives a call, you can answer the call by pressing the PTT
button within “Call Hold Time”. If the time expires, you need to redial. The “Call Hold Time” can be
