Kirisun FP460, Руководство по обслуживанию

Страница: 24 / 53

FP460 Service Manual
Page 23 of 53
4.2 Menu in analog mode
In analog channel, there are Scan, Channel Info, Settings, APPs and Radio Info in the
main menu, the contents of which are the same as on digital channel. (Refer to: Menu in
digital mode)
You can check the frequency and CTCSS of the current channel under Channel Info
menu item.
4.3 Major Functions
4.3.1Keypad Lock
If the keypad is locked, the keys have no reaction when pressing key except the PTT
key, Emergency key, coding knob or the Keypad Lock key is pressed. Thus, it can avoid
changing the current channel and working status unconsciously.
Long press the Keypad Lock shortcut key to lock the keypad, and long press this key
or “
＊
” key to unlock it.
You can turn on or off this function following these steps: “Setting” menu Æ ”Keypad
Lock” item Æ select “ON” or “OFF”.
When keypad lock is on, the radio will enter keypad lock status when no operation.
4.3.2 TOT
This function forbids you from occupying the channel for a long time. If the continuous
transmitting time exceeds the setting time by dealer, the radio sends out a warning tone
and stops transmitting. Release the PTT key to stop the warning tone. After a period of
time, which is set by dealer, you can transmit again. And if the radio is programmed with
pre-alert function by the dealer, the radio will send out an alert before the time out timer
expires.
4.3.3 Scan
During scan, the radio checks and stops on a busy channel. Then the radio
continues scanning until the channel is not busy for a while (this time is set by dealer,
which is named as Scan Hold Time).
Steps to start scanning: press the Scan shortcut key Æ select “Start” item. The radio
scans the channels in the current scanning list one by one. During scan, press the Cancel
key or scan shortcut key to stop.
◆
Scan revert channel
During scan, press the PTT key to make the radio transmit on a default channel. The
channel can be programmed by your dealer.