Kirisun FP460, Руководство по обслуживанию

Страница: 20 / 53

FP460 Service Manual
Page 19 of 53
Contact list
You can view the entire Contacts list through Contact menu or the Contact List shortcut
key. These contacts can be edited by programming software or by inputting manually.
Only the private call contact can be inputted manually.
Enter Contacts list, choose one contact, you can perform the following operations:
press the PTT Button to send a call; check the detailed information; send a Status Inquire
Call(only individual call contacts); set this contact as default contact; edit(only individual
call contacts) or delete(only individual call contacts) contact. If Kill, Revive function is
enabled by your dealer; you can also send Kill or Revive command to the contact.
About the descriptions of Status Inquire, Set as default contact, Kill and Revive, details
refer to Call Log Section. And other functions are as below:
1)Detailed information
：
You can check the contact’s name, number, and call type.
2)Edit ：
You can edit the contact’s name and number.
3) Delete:
Delete the selected contact.
4) New contact
：
You can create an individual call contact into the contacts list. The contact number is
made up of 7 digits.
◆
Scan
Press the “Menu key” to access the main menu, then press Up/Down key to enter
scan.
Starting Scan
Scan function helps you to receive calls from other channels, so as to supervise the
activities of the personnel. Select Start item and confirm to start scanning, and press the
Cancel Key or Scan shortcut key to stop scanning.
In scanning status, press the Menu Key, the following menu will be displayed:
Scan
Start
Scan List