Kirby LP1000, Руководство по эксплуатации и обслуживанию

Страница: 19 / 91

VI-MMXII Page 19
DURING OPERATION
Beware of bystanders, particularly children ! Always look around to make sure that it is safe to
start the engine of the towing vehicle or move the unit. This is particularly important with higher
noise levels and quiet cabs, as you may not hear people shouting.
NO PASSENGERS ALLOWED
- Do not carry passengers anywhere on, or in, the tractor or equipment, except as required for
operation.
Keep hands and clothing clear of moving parts. Do not clean, lubricate or adjust your mixer/feeder
while it is running.
Be especially observant of the operating area and terrain - watch for holes, rocks or other hidden
hazards. Always inspect the area prior to operation.
Do not operate on steep slopes as overturn may result. Operate up and down (not across)
intermediate slopes. Avoid sudden starts and stops. Pick the most level possible route when
transporting across fields. Avoid the edges of ditches or gullies and steep hillsides. Be extra careful
when working on inclines.
Periodically clear the equipment of hay, feed, twine or other materials to prevent buildup of dry
combustible materials.
Maneuver the tractor or towing vehicle at safe speeds. Avoid overhead wires or other obstacles.
Contact with overhead lines could cause serious injury or death. Allow for unit length when making
turns.
Do not walk or work under raised components or attachments unless securely positioned and
blocked.
Keep all bystanders, pets and livestock clear of the work area.
Operate the towing vehicle from the operator’s seat only. Never stand alongside of the unit with
engine running. Never attempt to start engine and/or operate machine while standing alongside of
unit.
Never
leave a running mixer/feeder unattended.
As a precaution, always check the hardware on mixer/feeder prior to operating the equipment.
Correct all problems. Follow the maintenance safety procedures.
FOLLOWING OPERATION
Following operation, or when unhitching, stop the tractor or towing vehicle, set the brakes, disengage
the PTO and all power drives, shut off the engine and remove the ignition keys.
Store the unit in an area away from high traffic areas.