26
© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613002
Communications
B
CAUTION
Do not remove the earphones by pulling on the wires. This
may damage their interior connections.
1) Remove the microphone from the oral nasal. Once again do not pull on the wire,
this can damage the connection.
2) Lightly rinse the assembly with fresh clean water. Do not immerse the entire
assembly underwater. Try to keep the water out of the earphone covers and from
under the module cover.
3) Dry the assembly off. Open the earphone covers, take the module cover off and
let everything on the inside dry.
4) Once everything is dry, reassemble the earphone covers and reinstall the module
cover.
B
CAUTION
The waterproof case for your wireless communications unit
should only be attached to your scuba backpack, never to
your weight belt. In the event your belt must be dropped the
belt must have a clear drop path and must not be connected
to any other piece of gear. If this procedure is not followed the
weight belt and wireless electronics case will be attached to
the mask by the connecting wire.
