background image

© ⅯⅯⅩⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 120613008 

3

 

B

 

WARNING

Follow all the instructions in this manual carefully and heed 
all safety precautions. Improper use of this diving mask could 
result in serious injury or death.

B

 

WARNING

Diving is a life threatening occupation. Even if you do everything 

right you can still be killed or injured. None of the models of 

Kirby Morgan helmets or masks can prevent accidents, injuries 

or death due to improper training, poor-health, improper super-

vision, improper job requirements, improper maintenance or 

acts of God.

If you have any questions concerning this manual, contact KMDSI (805) 928-

7772 or by Email at [email protected] or Dive Lab Inc. (850) 235-2715 or at 

[email protected]

Table Of Contents

Definition of Signal Words Used in this Manual

 � � � � � � � � � � � � � � � � � �

2

Section 1 Important Information—Please Read!

  � � � � � � � � � � � � � � � �

4

Section 2 Introduction

  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

5

Section 3 Equipment Specifications

 � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

6

Section 4  Panel Functions

  � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

7

Section 5 Controls And Connections:

 � � � � � � � � � � � � � � � � � � � � � � � � � � �

8

Section 6 Maintenance & Troubleshooting Diver Radio Field 

Check Procedures:

 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

11

Illustrations

Figure 1 Controls/Connections Panel

 � � � � � � � � � � � � � � � � � � � � � � � � � � � �

7

Figure 2 2-Wire Mode

 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

17

Figure 3 4-Wire Mode

 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

18

Figure 4 Blowaparts/Parts List

 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �

19

Содержание 100-400




















Отзывы: