4.
Installation
The following section describes the CVF4 unit and the installation.
4.1.
Individual components
The CVF4 consists of:
1.
Base plate with ventilator, heater and connector
2.
Replaceable filter plus cover
3.
Top cover
Included with the product are:
1.
Ventilation Unit
2.
(Optional) 8-wire cable with connector or 8 pins connector only for customer cable
3.
Fixing kit with screws, washers and Allen key
4.
Instruction sheet
5.
Pack of 5 spare ventilation fan inlet filters
For optional accessories see chapter 3.
4.2.
Tools required
If the CVF4 is mounted with the supplied screws only the supplied Allen key is required. Make sure there is
space to fasten the screw under the bottom of the plate. To fasten the radiometers other Allen keys or
screwdrivers may be necessary.
4.3.
Preparation
Like for any radiometer with 360 ° field of view, make sure there are
no obstructions
that are higher than
ten times
their distance when selecting a location for the CVF4.
h
10 x h
Содержание CVF4
Страница 1: ...Instruction Manual CVF4 Ventilation Unit V2007 01...
Страница 17: ...17...
