1. CHANGING OIL
Drain the oil while the engine is still warm to assure rapid and complete draining.
1. Loosen the cover screw and remove the left side maintenance cover.
2. Remove the oil filler cap.
3. Drain dirty oil into a container thoroughly.
4. Refill with the recommended oil, and check the oil level.
5. Reinstall the left side maintenance cover and tighten the cover screw securely.
Engine oil capacity: 0.4L (0.42USQT, 0.35LMQT)
Make sure to turn the engine switch and the fuel cap vent lever OFF before
draining.
CAUTION
Wash your hands with soap and water after handing used oil.
NOTE
Please dispose of used motor oil in a manner that is compatible with the
environment. We suggest you take it in a sealed container to your local service
station for reclamation. Do not throw it in the trash or pour it on the ground.
OIL FILLER CAP
OIL FILLER HOLE
UPPER LEVEL
MAINTENANCE
COVER
MAINTENANCE
COVER SCREW
4. Pull the starter grip until resistance is felt, the pull the starter grip briskly toward the
arrow as shown below.
3. Move the choke handle to the START position.
NOTE:
Do not use the choke when the engine is warm or the air temperature is high.
CAUTION
Do not allow the starter grip to snap back, Return it slowly by hand.
STARTER GRIP
CHOKE HANDLE
START
START
