KIP Fold 1000, Офлайн руководство пользователя

Страница: 19 / 20

Error Codes
Code Description
21 Error on stepper control boards
21:01 Error on starting stepper control board
21:02 Error on stopping stepper control board
22 Sensor errors on start-up
22:00 Sensor LB0 cut
22:01 Sensor LB1 cut
22:02 Sensor LB2 cut
22:03 Sensor LB3 cut
22:04 Sensor LB4 cut
23 Sensor sends high level permanently
23:00 Sensor LB0
23:01 Sensor LB1
23:02 Sensor LB2
23:03 Sensor LB3
23:04 Sensor LB4
24 Processing errors on stepper control boards
24:01 Error while calculating the step
24:02 Error while counting the steps
25 hardware errors
25:01 Lack of 5 Volts external
25:02 Lack of 38 Volts in FF or CF door open
25:03 Cover open
26 Time out errors
26:01 No ready signal after paper cut
26:02 No paper at sensor LB1 after paper cut
26:03 No paper at sensor LB1 without cut signal
26:04 Jam between sensors LB0 and LB1
26:05 No trailing edge of the paper at sensor LB1
26:06 Too many folds, document is too long
26:07 No trailing edge of the paper at sensor LB0
26:08 Unexpected paper at sensor LB4 in Online-Mode
26:09 Unexpected paper at “no fold” switch LB5 in Online-Mode