Kioti LX500L, Руководство пользователя

Страница: 142 / 158

11
-
LX500L
If you intend to store your tractor for
an extended period of time, follow the
procedures outlined below. These
procedures will insure that the trac-
tor is ready to operate with minimum
preparation when it is removed from
storage.
1. Check the bolts and nuts for loose-
ness, and tighten if necessary.
2. Apply grease to tractor areas where
bare metal will rust also to pivot
areas.
STORAGE
t91ob01a
8. With all implements lowered to the
ground, coat any exposed hydraulic
cylinder piston rods with grease.
9. Remove the battery from the trac-
tor. Store the battery following the
battery storage procedures. (See
"Battery condition" in 100 hours in
periodic service section)
(1) Clutch Pedal (2) Interlock
(A) "PUSH" (B) "LOCK"
To.avoid.personal.injury:
Do.not.clean.the.machine.with.
engine.running.
To.avoid.the.danger.of.exhaust.
fume.poisoning,.do.not.operate.
the.engine.in.a.closed.building.
without.proper.ventilation.
When.storing,.remove.the.key.
from. the. key. switch. to. avoid.
unauthorized. persons. from.
operating. the. tractor. and. get-
ting.injured.
•
•
•
CAUTION
3. Detach the weights from the tractor
body.
4. Inflate the tires to a pressure a little
higher than usual.
5. Change the engine oil and idle the
engine for about 5 minutes to circu-
late oil throughout all engine parts.
6. Always pull the engine stop lever
outward.
7. To prevent the clutch from sticking,
move the clutch to "Disengaged"
position. If the clutch is left engaged
for an extended period of time, the
clutch plate may rust, making clutch
disengagement impossible at the
next operation.
LX500_en_om_11.indd 2 2012-11-27 오후 3:12:26