Kioti KL135, Руководство пользователя

Страница: 11 / 124

SAfETy PREcAUTiOnS 1-3
Travel speed should be such that complete control and machine
stability is maintained at all times. Where possible, avoid operation
near ditches, embankments and holes. Reduce speed when turn-
ing, crossing slopes, and on rough, slick or muddy surfaces.
never use your hand to check for suspected leaks under pressure.
Use a piece of cardbord or wood for this purpose. Escaping hy-
draulic oil or diesel fuel leaking under pressure can have sufficient
force to penetrate the skin and cause infection or serious injury,
seek medical attention immediately.
To prevent personal injury, relieve all pressure before disconnect-
ing fluid lines.
Before applying hydraulic pressure, make sure all hydraulic con-
nections are tight and components are in good condition.
contact with overhead power lines can cause severe electrical
burn or death from electrocution.
Make sure there is enough clearance between raised equipment
and overhead power lines.
Add recommended rear tire liquid weight or rear wheel weights for
increased stability.
A loader attachment should be transported in a low position at slow
ground speeds. Make turns slowly and use the tractor brakes cau-
tiously. A loaded attachment in the raised position alters the center
of gravity location of the machine and increases the possibility of
mishaps.
Do not stand, walk or work under a raised loader or attachment un-
less it is securely blocked or held in position. Accidental movement
of a control lever or leak in the hydraulic system could cause the
loader to drop, or attachment to dump, causing severe injury.
Make sure all parked loaders on stands are on a hard level surface
with all safety devices engaged to prevent loader from falling and
being damaged or injuring someone.
When using a loader, be alert of bucket position at all times. Load-
er in raised position with bucket rolled back can dump material on
tractor causing damage or injury to tractor and / or operator.
Always park loader with bucket attached to loader.
KL135-01.indd 3 2013-02-01 오전 11:16:32