- 5 -
K9 2400
K9 2440
U20SH05A
U20SH06A
3. Install the upper frame ass'y (42) and lower
frame ass'y (43) to the upper frame stay (it
installed in Step 2) and tighten the flange
nuts (3).
4. Bore a hole in the middle section (A) of the
main instrument panel with a hole cutter (40)
(optional).
< TEmPERED & LAmINATED GLASS SUB-
ASSEmBLING >
U20SH10A
U20SH11A
U20SH12A
) Fit the grommet (7) to the upper hole of
the windshield. Then,
fi
t the collar (0) and
cushion A (20) to the screw (5) and insert
it to the glass hole from the outside of the
windshield. Finally,
fi
t the cushion B (2) from
the inside of the windshield and install the
wiper motor bracket (27).
2) Install the wiper motor (24) to the wiper
motor bracket.
