IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water or moisture.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
• Do not push objects into apparatus vents or slots because fire or
electric shock hazards could result.
• Ventilation should not be impeded by covering the ventilation
openings with items such as newspapers, table cloth, curtains, etc.
• Do not install near any heat sources as radiators, heat registers,
stoves, or other apparatus(including amplifiers)that produce heat.
• Place apparatus in a stable location so it will not fall causing product
damage or bodily harm.
• Do not defeat the safety purpose of the polarized plug. A polarized
plug has two blades with one wider than the other. The wider blade
is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
• Operate the apparatus only from the low level audio line output jack
of the computer or of an audio device.
• Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for
long periods of time.
• The apparatus shall be disconnected from the mains by placing the
power/standby switch in the standby position and unplugging the
power cord of the apparatus from the AC mains receptacle.
• The socket-outlet shall be installed near the equipment and shall be
easily accessible.
• To prevent risk of fire or electric shock, avoid overloading wall outlets,
extension cords or integral convenience receptacles.
• Use the proper power source as described in the instructions or as
marked on the product.
• Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged; liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated “dangerous voltage” within the
products enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING
TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT
TO RAIN OR MOISTURE. THE UNIT SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL
BE PLACED ON UNIT.
ENVIRONMENTAL PROTECTION RECOMMENDATION
At the end of its working life, this product should not be disposed of with
standard household Waste, but rather dropped off at a collection point for
the disposal of Waste Electrical and Electronic Equipment(WEEE)for recycling.
This is confirmed by the symbol found on the product, user manual or packaging.
1
2
English
English
