© Copyright 2017 Kinsa, Inc.
For patents: kinsahealth.com/patents
This thermometer conforms to the following standards:
ASTM Standard E 1965-98:2009 Standard Specification for Infrared Thermometers for Intermittent
Determination of Patient Temperature
IEC/EN 60601-1-2: 2014 «Medical electrical equipment» – Part 1-2: General requirements for safety - electromagnetic
disturbances and electromagnetic emissions
IEC 60601-1-11: 2010 «Medical electrical equipment» - Part 1-11: General requirements for basic safety and
essential performance - Requirements for medical electrical equipment and medical electrical systems used in
the home healthcare environment
FCC Note: This device complies with part 15 of the FCC Rules. Operationis subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation. This equipment has been
tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy, which could theoretically
cause harmful interference to radio communications. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures: increase the separation
between the equipment and receiver, consult the dealer or an experienced radio/TV technician for help, or
contact Kinsa customer support.
The equipment is suitable for use in domestic establishments and is tested to CISPR emissions Class B Group 1
as well a home healthcare immunity criteria found in IEC 60601-1-2 Table 4, 6, and Table 9. During the IEC
60601-1-2 immunity tests performed the thermometer will accurately measure temperature or display an error.
Smart Ear utilizes Bluetooth Low Energy (BLE), which uses the 2.4 GHz ISM band. BLE operates between 2.402
and 2.480 GHz. Smart Ear transmits less than 0 dBm effective radiated power. To protect the environment,
dispose of empty batteries at appropriate collection sites according to national or local regulations. Keep out of
reach of young children, elderly and pets.
Manufactured By:
Kinsa, Inc
535 Mission Street, 18th Fl
San Francisco, CA 94105
www.kinsahealth.com
Customer Support:
Limited Warranty:
Kinsa, Inc warrants this product against any defects that are due to faulty material or
workmanship for a period of one year from the original date of consumer purchase or receipt as a gift. This
warranty applies when used for normal household use in accordance with the Instructions for Use and excludes
the battery and damage to the product resulting from accident or misuse. This product is not warrantied when
used in a professional environment.
In no event shall Kinsa, Inc be liable for any special, incidental, indirect, or consequential damages in connection
with the purchase or use of this product or costs over the original cost of the product.
If the product should not perform to specifications within the warranty period, please contact Customer
Support.
Explanation of Symbols
0120
8
L-10280 Rev A1
A-10240
Consult instructions for use
Temperature limitation
Humidity limitation
Manufacturer batch code
Catalogue number
Non-sterile
Type BF applied part
Do not use if product is
broken, damaged, or open
22
FCC ID: 2AFEOE2
