background image

    3. Cargo should be put as close to the center of the ATV as possible. Put cargo at the 

front of the rear luggage carrier. Put the cargo on the middle position and fix it on the 

carrier firmly. 

    3. Make sure the load does not interfere with controls or your sighting. 

4 .Ride more slowly than you would with a load. The more weight you carry, the slower 

you should go. Although conditions is different, it is not allower to exceed 2

nd

 gear 

whenever you are carrying heavier loads or when towing a trailer. The time from brake to 

stop will be increased for loaded vehicle. High speed and sharp turns should be avoided. 

5.Avoid riding on hills and rough road surface. And choose terrain carefully. Extra 

weight will affects the stability and operation of ATV. 

    This machine could be used to carry cargo and passengers is prohibited. 

Ride with care 

1.

 

Get training if you are unexperienced. 

Beginners should be trained at the guide of professional person. Drive with this 

ATV with low speeds first to familiar with its performance, even if you are an 

experienced rider, fo not attemp to operate at maximum performance until you are 

totally familiar with ATV’s performance. 

2.

 

Dress 

Always wear a motorcycle helmet when riding. 

Also wear the following protective tools eye protection   

3.

 

Do not operate after drinking alchohol or drugs containing sleeping pill composition, 

because operator would be slow in driving in such way. 

4.

 

Always check your ATV each time before you use it to make sure the reliabitity of 

ATV. Always follow the inspection and maintenance procedures in the operation 

Содержание XT400ATV







































Отзывы: