manualshive.com logo in svg

Kinroad XT400ATV, Руководство пользователя

Поделиться
Скачать
Kinroad XT400ATV Скачать руководство пользователя страница 15

     

The battery is and enclosed one and unnecessary to fill water. 

      Don’t take off the closing bolt when charging. 

      When charging. Please obey the charging current and time as shown on the following 

table. 

      Charge criteria: Charge the battery with ten percent of capacity of battery for 5 to 10 

hours, or quickly charge the battery with 2A to 3A for 2 hours. 

Tyre 

 

    The Front wheel :AT25X8-10     The Rear wheel:AT25X10-10 

Warning: 

      Use of improper tyres on this ATV, or operation of this ATV with improper tire pressure 

may increase your risk of accident. 

   Use of improper tyres on this ATV, or operation of this ATV with improper tyre 

pressure may. Cause loss of control. 

      Pay attention to choose the size and type of used tyres according to the description in 

the above chart and make sure that the tyre pressure is normal. 

   

  The tyres should be set to the recommended pressure.   

   Recommended pressure: Front 25kpa   Rear 25kpa 

      Check and adjust tyre pressure when the tyres are cold. 

      Tyre pressure in two sides should be the same. 

Tyre pressure below the minimum specified could cause the tyre to dislodge from the rim 

under severe riding conditions, the following are minimums:   

   Front 22kpa   Rear 22kpa 

Starting an engine 

 

 Warning:   

Содержание XT400ATV







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды