Kinor 16 CX-2M, Инструкция по эксплуатации

Страница: 14 / 17

button (40) and push gently until connecting the magazine. Now, if properly engaged, the
magazine may not move anymore. Then close the magazine latch (58) to be sure the
magazine will not move. If the closing latch is hard to close, don't force on it. It means
the magazine drive shaft is not properly connected to the camera. If forced this may occur
a damage on the drive shaft.
After closing the latch check the magazine is strongly connected to the camera body.
Installation of the motor (if not already installed)
With the installation of the motor put the clutch of cohesion into the nest, existing on the
camera. With the combination of protrusions on the clutch of the cohesion of the motor
with the grooves of clutch on the camera the motor sends the remainder to the support.
By the turning of knob 33 (see Fig. 7) eccentric lock you will accomplish its fastening on
the camera.