Kino KF615, Инструкция по установке и эксплуатации

Страница: 7 / 21

4
Tip:
The balance of the device is very important for preventing vibration and also
for opening and closing the door.
How to balance the device:
To align the device, first adjust the brackets so that the device stays in each
position and then open the front set points slightly to allow the device to
slide slightly towards the rear .it will cause the door to automatically close
after its opening.
Important tips:

After aligning the device and before connecting to the electricity, the
device should be kept at its place for at least 2 hours.

When electricity connect and disconnect consecutively, disconnect
the power plug from the power outlet and connect the power plug
again at least 15 minutes later.

Allow the compressor of device to turn on and off, 3 or 4 times
before placing goods inside the appliance.