Kino KF615, Инструкция по установке и эксплуатации

Страница: 16 / 21

13
Troubleshooting and flaw detection methods
flaws cause Flaw detection method
The
refrigerator
does not
light up
Power does not go into the
outlet
Check the fuse and plug
The thermostat is set to off Set the thermostat degree
Power voltage is weak
Check the wiring and use a suitable
stabilizer if necessary
Compressor
works too
much
The product door is too open
and closed
Control the door opening
The degree of thermostat is high Lower the thermostat degree
The condenser pipes are dirty Clean the pipes
The product is in a very hot
environment
Keep the product away from heat or
sunlight
Inside of the
cabin does
not cool
enough
The degree of thermostat is low Increase the degree of thermostat
Product door is too open or
closed
Control the door opening
The product is in a very hot
environment
Keep the product away from heat or
sunlight
The device
has a sound
The device is not aligned Align the adjusting screws
The adjusting screws are loose
and collide with the parts
behind the device
Tighten the adjusting screws and prevent
the parts from falling apart
The inside
light does
not turn on
LED is burnt out LED must be replaced
The power of the appliance is
disconnected
Connect the plug into the power