15
Dimmer level - Lamp response
Sliding the fader on the dimmer board from 0 ~ 100 controls the
number of lamps that are on within a fixture. Note: the lamps may
respond ± 4 channel levels, depending on the dimmer board.
VistaBeam 600 Lamp
Sequence
Addressing:
In Fixture Mode selecting the base address
automatically assigns the 7
th
address (in VistaBeam 600) to
control the
STD/HO
setting. For example setting 001 as the
first address automatically assigns address 007 as the control
address for the STD/HO setting. Not assigning the 7
th
address
results in the fixture operating at the HO setting.
For the sake of simplification, it is advisable to select address
sequences such as 10, 20, 30, 40 and so on. This also allows
the operator to change from Fixture Mode to Individual Lamp
Mode without readdressing the fixtures. Never assign the 7
th
address to a new fixture. In the VistaBeam 300 every 4
th
address
controls the
STD/HO
setting.
DMX Address # 001
Lamp #
Dimmer
Level
Lamp 1
6
Lamp 1~2
19
Lamp 1~3
32
Lamp 1~4
45
Lamp 1~5
57
Lamp 1~6
95
DMX Address # 007
HO 0
STD 50
