7
ParaZip Fixtures can be jumpered
using the IN and OUT ports. As many
as 100 Fixtures can be jumpered on
one chain as long as the DMX cable
run remains under 1000 feet or 40 x
25ft DMX cables.
Note:
When operating Fixtures at great
distances from the dimmer board, it is
recommended to use Opto-Isolators
to provide DMX signal amplification.
The
END OF LINE
switch must be set to open
( O )
on Fixtures within the DMX chain.
Set to
END OF LINE
when the Fixture is the last
DMX control device in the chain.
Note: When the last Fixture's DMX Term is set to
“END OF LINE,” it will absorb all energy in the
DMX line, ensuring DMX signals are transmitted
correctly. If a signal is not terminated, it is called
a “Reflected Wave,” and may create
transmission errors by causing valid DMX signals
to be canceled.
The
ParaZip 200
operates on
one address per fixture.
Two lamps are dimmed on one
dimmer channel.
Tip:
Position 2
allows for a greater degree of control. The board
operator can turn two lamps off (1 f-stop drop in exposure) without
shifting the color temperature.
