4
Inserting Lamps
Inserting Gel Frame
Inserting Louver
Applying Gel to Frame
Insert lamps into both lamp holders. Twist ¼ turn to make electrical contact.
Option 1 – The Gel Frame comes with gel clips. Cut the gel to size
and use the clips to fasten the gel to the frame.
Note: It is recommended to attach one clip on each side and one
clip near all four corners.
Option 2 – Another method is to apply transfer tape directly to the
gel frame. The clips are not necessary when taping the gel.
The gel frame is secured to the fixture by 4 spring-loaded pins. Align the pins of the
gel frame with the oval receptacle holes on the edge of the fixture. Pull back the pins
and release into the receptacles to properly secure the gel frame.
Place the long edge of the Louver
(LVR-I80-S)
into the lower channel containing a set
of leaf springs. Press down on the Louver and slip the upper edge of the louver into
the upper channel of the fixture. To remove, reverse the procedure.
