Kino Flo DIV-200-120, Руководство по эксплуатации

Страница: 7 / 13

In temperatures below 60
°
F (15
°
C) the ballast may take longer to strike. If
lamp does not strike within 5 seconds, switch the ballast to OFF, and try
again. Check that the lamps are properly seated, set dimmer to Full and
restrike. If temperatures are
too low, try to warm up the fixture to at least
60
°
F. Lamps will turn on at preset dimmer settings as long as the
temperature
is above 60
°
F (15
°
C).
MANUAL DIMMING CONTROL
The Dimmer should be full up when
striking the lamp. Once the lamps
have come up to full temperature, in
about 3-5 minutes, then dim to the
desired light level.
For full light output, turn dimmer fully
clock wise.
An input jack for an optional Remote
Dimmer is located next to the power
cord.
The Diva-Lite 400 Lamp Select
Switch was added in February
2005 and allows for 4 lamp or 2
lamp operation.
Turning off 2 lamps equals a
one-stop reduction in light
output without color shift. In the
4 Lamp position all lamps are
on. In the 2 Lamp position only
the two center lamps are on.
Note: This feature is not
available for the Diva-Lite 200.
7