12
Celeb 401 Wireless Operation
The Celeb 401 includes a built-in Lumen Radio receiver and can be operated
wirelessly with a Lumen Radio transmitter (sold separately). Wireless is an option to
using DMX cables. Set DMX address as previously instructed on p. 9. For more infor-
mation on Lumen Radio Receiver/Transmitter, see
www.LumenRadio.com
.
Press the white Power/Wireless button. A blue light indicates
fixture is ready to link to transmitter.
Note: The transmitter will not link to the fixture if the
Power/Wireless button is not on.
To unlink from the fixture: Press and hold the red unlink button
for 3 seconds. A blue light is displayed when unlinked.
To unlink from the
transmitter
: Press and hold the link/unlink
button for 3 seconds. This will unlink all powered fixtures linked
to the transmitter.
Note: When power is removed from fixture, it will remember its
linked/unlinked state.
Press the link/unlink button on the transmitter to link to the
Celeb 401. A fast red blinking light is displayed while searching
for signal. A slow green blinking light* displays when linked.
A solid green light* is displayed when linked and DMX data is
present with a strong signal.
Note: Fixture should only receive DMX wirelessly
or
through
DMX cables, not both. Otherwise, the fixture will not respond
properly.
*Green, Orange or Red light indicates signal strength.
A
A) Signal Strength Indicator:
B) Power/Wireless (white):
On/Off
C) Unlink (red):
Hold for 3 seconds to unlink
Note: Fixture must be powered on and Power/Wireless must be
in “On” position. In addition, transmitter must be connected to a
DMX controller with a valid DMX output.
C
B
A
Blue
On - Wireless Enabled/Unlinked
Green
100% - 60%
Orange
59% - 20%
Red
Less than 10%
