manualshive.com logo in svg

KINNEY KVO Series, Руководство оператора, Страница: 5 / 40

Поделиться
Скачать
KINNEY KVO Series Скачать руководство пользователя страница 5

1

Manual 1867    Rev A    p/n 1867

INTRODUCTION

01

CONGRATULATIONS

 on the purchase of a new 

Kinney

®

 KVO Series

 Oil Sealed Rotary Vane 

vacuum pump. Please examine the pump for 

shipping damage, and if any damage is found, 

report it immediately to the carrier. If the pump is to 

be installed at a later date, make sure it is stored 

in a clean, dry location and rotated regularly. Make 

sure covers are kept on all openings. If pump is 

stored outdoors, be sure to protect it from weather 

and corrosion.

This manual applies to Kinney Vacuum models 

KVO Series. Become thoroughly familiar with these 

instructions before attempting to install, operate 

or repair this unit. Consult Kinney when problems 

arise that cannot be resolved after reading 

this manual. Always include pump nameplate 

information when ordering parts or components.

Kinney KVO Series

 vacuum pumps are built to 

exacting standards and, if properly installed 

and maintained, will provide many years of 

reliable service. Read and follow every step of 

these instructions when installing and maintaining 

the pump. 

WARNING

!

Serious injury can result from operating or 

repairing this machine without first reading the 

service manual and taking adequate safety 

precautions.

OTE:  

N

Record the pump model and serial 

numbers in the OPERATING DATA form 

on the inside back cover of this manual. 

Use this identification on any replacement 

part orders, or if service or application 

assistance is required.

SCOPE OF MANUAL

The scope of this manual includes the KVO Series 

oil sealed rotary vane vacuum pumps.

Содержание KVO Series









































Отзывы:

Нет отзывов